Watch My Domains Pro 2.0 crack serial keygen

  • 04.05.2019
  • Music

Watch My Domains Pro 2.0 crack serial keygen

It can recover 2 of passwords: password stored for the current logged-on user SocketSniff allows you to watch the Windows Sockets (WinSock) activity of. Feb 14, 2021 - Netflix Download Premium 6.96.725.0 Crack is a program to download ReiBoot Pro 8.0.13 Crack Latest Registration Code (2021) Free Download. Section 2 contains all of the requirements that apply to a specific serial number, which MUST be available and unique across devices with the same MODEL. lm)/ /Jan 2000/ /Jan 2000/ /nam\w?azu/ /nam\w?azu/ /prox(y Cloud
~ Behind a search engine ~
       Petit image   Behind a
search engine
Version September 2000 ~ Updated September 2001

For reasons that appeared obvious a posteriori, this specific page turned out to be one of THE MOST VISITED of my site. The main reason is that people, especially when they don't know how to search effectively, rely too much on general, regional or specific search engines (instead of writing their own bots and/or of learning some advanced techniques) and hence may land here, especially after having used my 'Namazu' search engine.
Alas: this page just lists most of the queryes they were looking for, Watch My Domains Pro 2.0 crack serial keygen, without answering them.
This page remains interesting. if I were into 'delivering what the clients crave for', Watch My Domains Pro 2.0 crack serial keygen, I would start developing pages on these subjects. Watch My Domains Pro 2.0 crack serial keygen I have other priorities: my readers should LEARN how to find what they are looking for, they should NOT find it directly, ready-chewed and pre-prepared.
(Anyway you can always check what people are right now searching for on my search engine [here], using this PHP script, courtesy of Laurent, and part of the more general [pepldoin] section)

Behind a search engine
(Info for people that are not in the know)
by ~S~ fravia+, April 2000


This is a small snippet from the loggings of my "namazu" search engine, that allows people to search my site, Watch My Domains Pro 2.0 crack serial keygen.
Search string, occurrences, requesting IP and date & hour are logged, for instance these four visitors, in the early hours of Tuesday 28 March:
"tn3270 and dos",0,"146.18.173.73","Tue Mar 28 00:11:05 2000" "3270 and dos",0,"146.18.173.73","Tue Mar 28 00:11:16 2000" "IBM 3270 and dos",0,"146.18.173.73","Tue Mar 28 00:11:26 2000" "tasm",3,"195.241.207.113","Tue Mar 28 00:11:38 2000" "reverse menus",6,"158.42.39.17","Tue Mar 28 00:12:21 2000" "tn3270 and linux",0,"146.18.173.74","Tue Mar 28 00:12:49 2000" "codecracking",0,"12.65.133.11","Tue Mar 28 00:12:53 2000" "3270 and linux",0,"146.18.173.74","Tue Mar 28 00:12:58 2000"
As you can see 146.18.173.74 was interested in tn3270 (which is indeed a very interesting protocol, btw :-)
Here you have some searchstrings taken during the week between Tue Mar 28 00:11:05 2000 and Mon Apr 3 23:57:01 2000. As you will see, perusing the strings below, there are some quite instructive patterns even on such a small scale. Now imagine multiplying this a billion times. Imagine you are the "owner" of altavista, or any other important Watch My Domains Pro 2.0 crack serial keygen engine, imagine you can decide the content of your own grepping programs (so as to list all occurrences of specific shares, products, films, software). I bet you begin to understand how much information one can grep from people using "free" search engines.
See my shortb comments [below], Watch My Domains Pro 2.0 crack serial keygen, after the list, Watch My Domains Pro 2.0 crack serial keygen.

( amor* patch ) ( amor* patch ) *.zip (IDA Pro) (REVERS PHONE NUMBERS) (REVERS PHONE) (REVERSE PHONE NUMBERS TEXT) (REVERSE PHONE NUMBERS) (The Cleaner) * * * * * * ** *.jpg *.txt *active* *an *an* *asm *casmate* *ccw* *designa* *dos* *dows *dxf* .cab .cgi .jpeg .txt / / / / / / / /(\w*

Android 12 Compatibility Definition

1. Introduction

This document enumerates the requirements that must be met in order for devices to be compatible with Android 12.

The use of “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” is per the IETF standard defined in RFC2119.

As used in this document, a “device implementer” or “implementer” is a person or organization developing a hardware/software solution running Android 12. A “device implementation” or “implementation" is the hardware/software solution so developed.

To be considered compatible with Android 12, device implementations MUST meet the requirements presented in this Compatibility Definition, including any documents incorporated via reference.

Where this definition or the software tests described in section 10 is silent, ambiguous, or incomplete, it is the responsibility of the device implementer to ensure compatibility with existing implementations.

For this reason, the Android Open Source Project is both the reference and preferred implementation of Android. Device implementers are STRONGLY RECOMMENDED to base their implementations to the greatest extent possible on the “upstream” source code available from the Android Open Source Project. While some components can hypothetically be replaced with alternate implementations, it is STRONGLY RECOMMENDED to not follow this practice, as passing the software tests will become substantially more difficult. It is the implementer’s responsibility to ensure full behavioral compatibility with the standard Android implementation, including and beyond the Compatibility Test Suite, Watch My Domains Pro 2.0 crack serial keygen. Finally, note that certain component substitutions and modifications are explicitly forbidden by this document.

Many of the resources linked to in this document are derived directly or indirectly from the Android SDK and will be functionally identical to the information in that SDK’s documentation. In any cases where this Compatibility Definition or the Compatibility Test Suite disagrees with the SDK documentation, the SDK documentation is considered authoritative. Any technical details provided in the linked resources throughout this document are considered by inclusion to be part of this Compatibility Definition.

1.1 Document Structure

1.1.1. Requirements by Device Type

Section 2 contains all of the requirements that apply to a specific device type. Each subsection of Section 2 is dedicated to a specific device type.

All the other requirements, that universally apply to any Android device implementations, are listed in the sections after Section 2. These requirements are referenced as "Core Requirements" in this document.

1.1.2. Requirement ID

Requirement ID is assigned for MUST requirements.

  • The ID is assigned for MUST requirements only.
  • STRONGLY RECOMMENDED requirements are marked as [SR] but ID is not assigned.
  • The ID consists of : Device Type ID - Condition ID - Requirement ID (e.g. C-0-1).

Each ID is defined as below:

  • Device Type ID (see more in 2. Device Types)
    • C: Core (Requirements that are applied to all Android device implementations)
    • H: Android Handheld device
    • T: Android Television device
    • A: Android Automotive implementation
    • W: Android Watch implementation
    • Tab: Android Tablet implementation
  • Condition ID
    • When the requirement is unconditional, this ID is set as 0.
    • When the requirement is conditional, 1 is assigned for the 1st condition and the number increments by 1 within the same section and the same device type.
  • Requirement ID
    • This ID starts from 1 and increments by 1 within the same section and the same condition.

1.1.3. Requirement ID in Section 2

The Requirement IDs in Section 2 have two parts. The first corresponds to a section ID as described above. The second part identifies the form factor and the form-factor specific requirement.

section ID that is followed by the Requirement ID described above.

  • The ID in Section 2 consists of : Section ID / Device Watch My Domains Pro 2.0 crack serial keygen ID - Condition ID - Requirement ID (e.g. 7.4.3/A-0-1).

2. Device Types

The Android Open Source Project provides a software stack that can be used for a variety of device types and form factors. Watch My Domains Pro 2.0 crack serial keygen support security on devices, the software stack, including any replacement OS or an alternate kernel implementation, is expected to execute in a secure environment as described in section 9 and elsewhere within this CDD. There are a few device types that have a relatively better established application distribution ecosystem.

This section describes those device types, and additional requirements and recommendations applicable for each device type.

All Android device implementations that do not fit into any of the described device types MUST still meet all requirements in the other sections of this Compatibility Definition.

2.1 Device Configurations

For the major differences in hardware configuration by device type, see the device-specific requirements that follow in this section.

2.2. Handheld Requirements

An Android Handheld device refers to an Android device implementation that is typically used by holding it in the hand, such as an mp3 player, phone, or tablet.

Android device implementations are classified as a Handheld if they meet all the following criteria:

  • Have a power source that provides mobility, such as a battery.
  • Have a physical revoice pro 4 crack Archives screen size in the range of 3.3 inches (or 2.5 inches for devices which launched on an API level earlier than Android 11) to 8 inches.

The additional requirements in the rest of this section are specific to Android Handheld device implementations.

Note: Requirements that do not apply to Android Tablet devices are marked with an *.

2.2.1. Hardware

Handheld device implementations:

  • [7.1.1.1/H-0-1] MUST have at least one Android-compatible display that meets all requirements described on this document.
  • [7.1.1.3/H-SR] Are STRONGLY RECOMMENDED to provide users an affordance to change the display size (screen density).

  • [7.1.1.1/H-0-2] MUST support GPU composition of graphic buffers at least as large as the highest resolution of any built-in display.

If Handheld device implementations support software screen rotation, they:

  • [7.1.1.1/H-1-1]* MUST make the logical screen that is made available for third party applications be at least 2 inches on the short edge(s) and 2.7 inches on the long edge(s). Devices which launched on an API level earlier than that of this document are exempted from this requirement.

If Handheld device implementations do not support software screen rotation, they:

  • [7.1.1.1/H-2-1]* MUST make the logical screen that is made available for third party applications be at least 2.7 inches on the short edge(s). Devices which launched on an API level earlier than that of this document are exempted from this requirement.

If Handheld device implementations claim support for high dynamic range displays through they:

  • [7.1.4.5/H-1-1] MUST advertise support for the, and extensions.

Handheld device implementations:

  • [7.1.4.6/H-0-1] MUST report whether the device supports the GPU profiling capability via a system property .

If Handheld device implementations declare support via a system propertythey:

Handheld device implementations:

  • [7.1.5/H-0-1] MUST include support for legacy application compatibility mode as implemented by the upstream Android open source code. That is, device implementations MUST NOT alter the triggers or thresholds at which compatibility mode is activated, and MUST NOT alter the behavior of the compatibility mode itself.
  • [7.2.1/H-0-1] MUST include support for third-party Input Method Editor (IME) applications.
  • [7.2.3/H-0-3] MUST provide the Home function on all the Android-compatible displays that provide the home screen.
  • [7.2.3/H-0-4] MUST provide the Back function on all the Android-compatible displays and the Recents function on at least one of the Android-compatible displays.
  • [7.2.3/H-0-2] MUST send both the normal and long press event of the Back function () to the foreground application. These events MUST NOT be consumed by the system and CAN be triggered by outside of the Android device (e.g. external hardware keyboard connected to the Android device).
  • [7.2.4/H-0-1] MUST support touchscreen input.
  • [7.2.4/H-SR] Are STRONGLY RECOMMENDED to launch the user-selected assist app, in other words the app that implements VoiceInteractionService, or an activity handling the on long-press of or if the foreground activity does not handle those long-press events.
  • [7.3.1/H-SR] Are STRONGLY RECOMMENDED to include a 3-axis accelerometer.

If Handheld device implementations include a 3-axis accelerometer, they:

  • [7.3.1/H-1-1] MUST be able to report events up to a frequency of at least 100 Hz.

If Handheld device implementations include a GPS/GNSS receiver and report the capability to applications through the feature flag, they:

  • [7.3.3/H-2-1] MUST report GNSS measurements, as soon as they are found, even if a location calculated from GPS/GNSS is not yet reported.
  • [7.3.3/H-2-2] MUST report GNSS pseudoranges and pseudorange rates, that, in open-sky conditions after determining the location, while stationary or moving with less than 0.2 meter per second squared of acceleration, are sufficient to calculate position within 20 meters, Watch My Domains Pro 2.0 crack serial keygen, and speed within 0.2 meters per second, at least 95% of the time.

If Handheld device implementations include a 3-axis gyroscope, they:

  • [7.3.4/H-3-1] MUST be able to report events up to a frequency of at least 100 Hz.
  • [7.3.4/H-3-2] MUST be capable of measuring orientation changes up to 1000 degrees per second.

Handheld device implementations that can make a voice call and indicate any value other than in :

  • [7.3.8/H] SHOULD include a proximity sensor.

Handheld device implementations:

  • [7.3.11/H-SR] Are RECOMMENDED to support pose sensor with 6 degrees of freedom.
  • [7.4.3/H] SHOULD include support for Bluetooth and Bluetooth LE.

If Handheld device implementations include a metered connection, they:

  • [7.4.7/H-1-1] MUST provide the data saver mode.

If Handheld device implementations include a logical camera device that lists capabilities usingthey:

  • [7.5.4/H-1-1] MUST have normal field of view (FOV) by default and it MUST be between 50 and 90 degrees.

Handheld neat video for resolve Archives implementations:

  • [7.6.1/H-0-1] MUST have at least 4 GB of non-volatile storage available for application private data (a.k.a. "/data" partition).
  • [7.6.1/H-0-2] MUST return “true” for when there is less than 1GB of memory available to the kernel and userspace.

If Handheld device implementations declare support of only a 32-bit ABI:

  • [7.6.1/H-1-1] The memory available to the kernel and userspace MUST be at least 416MB if the default display uses Watch My Domains Pro 2.0 crack serial keygen resolutions up to qHD (e.g. FWVGA).

  • [7.6.1/H-2-1] The memory available to the kernel and userspace MUST be at least 592MB if the default display uses framebuffer resolutions up to HD+ (e.g. HD, WSVGA).

  • [7.6.1/H-3-1] The memory available to the kernel and userspace MUST be at least 896MB if the default display uses framebuffer resolutions up to FHD (e.g. WSXGA+).

  • [7.6.1/H-4-1] The memory available to the kernel and userspace MUST be at least 1344MB if the default display uses framebuffer resolutions up to QHD (e.g. QWXGA).

If Handheld device implementations declare support of 32-bit and 64-bit ABIs:

  • [7.6.1/H-5-1] The memory available to the kernel and userspace MUST be at least 816MB if the default display uses framebuffer resolutions up to qHD (e.g. FWVGA).

  • [7.6.1/H-6-1] The memory available to the kernel and userspace MUST be at least 944MB if Watch My Domains Pro 2.0 crack serial keygen default display uses framebuffer resolutions up to HD+ (e.g. HD, WSVGA).

  • [7.6.1/H-7-1] The memory available to the kernel and userspace MUST be at least 1280MB if the default display uses framebuffer resolutions up to FHD (e.g. WSXGA+).

  • [7.6.1/H-8-1] The memory available to the kernel and userspace MUST be at least 1824MB if Watch My Domains Pro 2.0 crack serial keygen default display uses framebuffer resolutions up to QHD (e.g. QWXGA).

Note that the "memory available to the kernel and userspace" above refers to the memory space provided in addition to any memory already dedicated to hardware components such as radio, video, and so on that are not under the kernel’s control on device implementations.

If Handheld device Watch My Domains Pro 2.0 crack serial keygen include less than or equal to 1GB of memory available to Watch My Domains Pro 2.0 crack serial keygen kernel and userspace, they:

  • [7.6.1/H-9-1] MUST declare the feature flag .
  • [7.6.1/H-9-2] MUST have at least 1.1 GB of non-volatile storage for application private data (a.k.a. "/data" partition).

If Handheld device implementations include more than 1GB of memory available to the kernel and userspace, they:

  • [7.6.1/H-10-1] MUST have at least 4GB of non-volatile storage available for application private data (a.k.a. "/data" partition).
  • SHOULD declare the feature flag .

If Handheld device implementations include greater than or equal to 2GB and less than 4GB of memory available to the kernel and userspace, they: * [7.6.1/H-SR] Are STRONGLY RECOMMENDED to support only 32-bit userspace (both apps and system code)

If Handheld device implementations include less than 2GB of memory available to the kernel and userspace, they: * [7.6.1/H-1-1] MUST support only 32-bit ABIs.

Handheld device implementations:

  • [7.6.2/H-0-1] MUST NOT provide an application shared storage smaller than 1 GiB.
  • [7.7.1/H] SHOULD include a USB port supporting peripheral mode.

If handheld device implementations include a USB port supporting peripheral mode, they:

  • [7.7.1/H-1-1] MUST implement the Android Open Accessory (AOA) API.

If Handheld device implementations include a USB port supporting host mode, they:

  • [7.7.2/H-1-1] MUST implement the USB audio class as documented in the Android SDK documentation.

Handheld device implementations:

  • [7.8.1/H-0-1] MUST include a microphone.
  • [7.8.2/H-0-1] MUST have an audio output and declare .

If Handheld device implementations are capable of meeting all the performance requirements for supporting VR mode and include support for it, they:

  • [7.9.1/H-1-1] MUST declare the feature flag.
  • [7.9.1/H-1-2] MUST include an application implementing that can be enabled by VR applications via .

If Handheld device implementations include one or more USB-C port(s) in host mode and implement (USB audio class), in addition to requirements in section 7.7.2, they:

  • [7.8.2.2/H-1-1] MUST provide the following software mapping of HID codes:
FunctionMappingsContextBehavior
AHID usage page: 0x0C
HID usage: 0x0CD
Kernel key:
Android key:
Media playbackInput: Short press
Output: Play or pause
Input: Long press
Output: Launch voice command
Sends: if the device is locked or its screen is off. Sends otherwise
Incoming callInput: Short press
Output: Accept call
Input: Long press
Output: Reject call
Ongoing callInput: Short press
Output: End call
Input: Long press
Output: Mute or unmute microphone
BHID usage page: 0x0C
HID usage: 0x0E9
Kernel key:
Android key:
Media playback, Ongoing callInput: Short or long press
Output: Increases the system or headset volume
CHID usage page: 0x0C
HID usage: 0x0EA
Kernel key:
Android key:
Media playback, Ongoing callInput: Short or long press
Output: Decreases the system or headset volume
DHID usage page: 0x0C
HID usage: 0x0CF
Kernel key:
Android key:
All. Can be triggered in any instance.Input: Short or long press
Output: Launch voice command
  • [7.8.2.2/H-1-2] MUST trigger ACTION_HEADSET_PLUG upon a plug insert, but only after the USB audio interfaces and endpoints have been properly enumerated in order to identify the type of terminal connected.

When the USB audio terminal types 0x0302 is detected, they:

  • [7.8.2.2/H-2-1] MUST broadcast Intent ACTION_HEADSET_PLUG with "microphone" extra set to 0.

When the USB audio terminal types 0x0402 is detected, Watch My Domains Pro 2.0 crack serial keygen, they:

When API AudioManager.getDevices() is called while the USB peripheral is connected they:

  • [7.8.2.2/H-4-1] MUST list a device of type AudioDeviceInfo.TYPE_USB_HEADSET and role isSink() if the USB audio terminal type field is 0x0302.

  • [7.8.2.2/H-4-2] MUST list a device of type AudioDeviceInfo.TYPE_USB_HEADSET and role isSink() if the USB audio terminal type field is 0x0402.

  • [7.8.2.2/H-4-3] MUST list a device of type AudioDeviceInfo.TYPE_USB_HEADSET and role isSource() if the USB audio terminal type field is 0x0402.

  • [7.8.2.2/H-4-4] MUST list a device of type AudioDeviceInfo.TYPE_USB_DEVICE and role FREE DOMAIN (DOMAIN GRATIS) if the USB audio terminal type field is 0x603.

  • [7.8.2.2/H-4-5] MUST list a device of type AudioDeviceInfo.TYPE_USB_DEVICE and role isSource() if the USB audio terminal type field is 0x604.

  • [7.8.2.2/H-4-6] MUST list a device of type AudioDeviceInfo.TYPE_USB_DEVICE and role isSink() if the USB audio terminal type field is 0x400.

  • [7.8.2.2/H-4-7] MUST list a device of type AudioDeviceInfo.TYPE_USB_DEVICE and role isSource() if the USB audio terminal type field is 0x400.

  • [7.8.2.2/H-SR] Are STRONGLY RECOMMENDED upon connection of a USB-C audio peripheral, to perform enumeration of USB descriptors, identify terminal types and broadcast Intent ACTION_HEADSET_PLUG in less than 1000 milliseconds.

If Handheld device implementations declare andthey:

  • [5.6(#5_6_audio-latency)/H-1-1] MUST have a Mean Continuous Round-Trip latency of 800 milliseconds or less over 5 measurements, with a Mean Absolute Deviation less than 100 ms, over at least one supported path.

If Handheld device implementations include at least one haptic actuator, they:

  • [7.10/H]* SHOULD NOT use an eccentric rotating mass (ERM) haptic actuator (vibrator).
  • [7.10/H]* SHOULD position the placement of the actuator near the location where the device is typically held or touched by hands.
  • [7.10/H]* SHOULD implement all public constants for clear haptics in android.view.HapticFeedbackConstants namely (CLOCK_TICK, CONTEXT_CLICK, KEYBOARD_PRESS, KEYBOARD_RELEASE, KEYBOARD_TAP, LONG_PRESS, TEXT_HANDLE_MOVE, VIRTUAL_KEY, VIRTUAL_KEY_RELEASE, CONFIRM, REJECT, GESTURE_START and GESTURE_END).
  • [7.10/H]* SHOULD implement all public constants for clear haptics in android.os.VibrationEffect namely (EFFECT_TICK, EFFECT_CLICK, EFFECT_HEAVY_CLICK and EFFECT_DOUBLE_CLICK) and all public constants for rich haptics in android.os.VibrationEffect.Composition namely (PRIMITIVE_CLICK and PRIMITIVE_TICK).
  • [7.10/H]* SHOULD use these linked haptic constants mappings.
  • [7.10/H]* SHOULD follow quality assessment for [createOneShot()](https://developer.android.com/reference/android/os/VibrationEffect#createOneShot(long,%20int)) and [createWaveform()](https://developer.android.com/reference/android/os/VibrationEffect#createWaveform(long[],%20int)) API's.
  • [7.10/H]* SHOULD verify the capabilities for amplitude scalability by running [android.os.Vibrator.hasAmplitudeControl()](https://developer.android.com/reference/android/os/Vibrator#hasAmplitudeControl()).

A linear resonant actuator (LRA) is a single-mass spring system which has a dominant resonant frequency where the mass translates in the direction of desired motion.

If Handheld device implementations include at least one linear resonant actuator, they:

  • [7.10/H]* SHOULD move the haptic actuator in the X-axis of portrait orientation.

If Handheld device implementations have a haptic actuator which is X-axis linear resonant actuator (LRA), they:

  • [7.10/H]* SHOULD have the resonant frequency of the X-axis Watch My Domains Pro 2.0 crack serial keygen be under 200 Hz.

If handheld device implementations follow haptic constants mapping, they:

  • [7.10/H]* SHOULD verify the implementation status by running [android.os.Vibrator.areAllEffectsSupported()](https://developer.android.com/reference/android/os/Vibrator#areAllEffectsSupported(int.)) and android.os.Vibrator.arePrimitvesSupported() API's.
  • [7.10/H]* SHOULD perform a quality assessment for haptic constants.
  • [7.10/H]* SHOULD provide fallback support to mitigate the risk of failure as described here.

2.2.2. Multimedia

Handheld device implementations MUST support the following audio encoding and decoding formats and make them available to third-party applications:

  • [5.1/H-0-1] AMR-NB
  • [5.1/H-0-2] AMR-WB
  • [5.1/H-0-3] MPEG-4 AAC Profile (AAC LC)
  • [5.1/H-0-4] MPEG-4 HE AAC Profile (AAC+)
  • [5.1/H-0-5] AAC ELD (enhanced low delay AAC)

Handheld device implementations MUST support the following video encoding formats and make them available to third-party applications:

  • [5.2/H-0-1] H.264 AVC
  • [5.2/H-0-2] VP8

Handheld device implementations MUST support the following video decoding formats and make them available to third-party applications:

  • [5.3/H-0-1] H.264 AVC
  • [5.3/H-0-2] H.265 HEVC
  • [5.3/H-0-3] MPEG-4 SP
  • [5.3/H-0-4] VP8
  • [5.3/H-0-5] VP9

2.2.3. Software

Handheld device transmac torrent Archives MUST have an application that handles the,and intents as described in the SDK documents, and provide the user affordance to access the document provider data by using API.

  • [3.2.3.1/H-0-2]* MUST preload one or more applications or service components with an intent handler, Watch My Domains Pro 2.0 crack serial keygen, for all the public intent filter patterns defined by the following application intents listed here.
  • [3.2.3.1/H-SR] Are STRONGLY RECOMMENDED to preload an email application which can handle ACTION_SENDTO or ACTION_SEND or ACTION_SEND_MULTIPLE intents to send an email.
  • [3.4.1/H-0-1] MUST provide a complete implementation of the Watch My Domains Pro 2.0 crack serial keygen API.
  • [3.4.2/H-0-1] MUST include a standalone Browser application for general user web browsing.
  • [3.8.1/H-SR] Are STRONGLY RECOMMENDED to implement a default launcher that supports in-app pinning of shortcuts, widgets and widgetFeatures.
  • [3.8.1/H-SR] Are STRONGLY RECOMMENDED to implement a default launcher that provides quick access to the additional shortcuts provided by third-party apps through the ShortcutManager API.
  • [3.8.1/H-SR] Are STRONGLY RECOMMENDED to include a default launcher app that shows badges for the app icons.
  • [3.8.2/H-SR] Are STRONGLY RECOMMENDED to support third-party app widgets.
  • [3.8.3/H-0-1] MUST allow third-party apps to notify users of notable events through the and API classes.
  • [3.8.3/H-0-2] MUST support rich notifications.
  • [3.8.3/H-0-3] MUST support heads-up notifications.
  • [3.8.3/H-0-4] MUST include a notification shade, providing the user Watch My Domains Pro 2.0 crack serial keygen ability to directly control (e.g. reply, snooze, dismiss, block) the notifications through user affordance such as action buttons or the control panel as implemented in the AOSP.
  • [3.8.3/H-0-5] MUST display the choices provided through in the notification shade.
  • [3.8.3/H-SR] Are STRONGLY RECOMMENDED to display the first choice provided through in the notification shade without additional user interaction.
  • [3.8.3/H-SR] Are STRONGLY RECOMMENDED to display all the choices provided through in the notification shade when the user expands all notifications in the notification shade.
  • [3.8.3.1/H-SR] Are STRONGLY RECOMMENDED to display actions for which is set as in-line with the replies displayed by .
  • [3.8.4/H-SR] Are STRONGLY RECOMMENDED to implement an assistant on the device to handle the Assist action.
  • If Handheld device implementations support Assist action, they:

    • [3.8.4/H-SR] Are STRONGLY RECOMMENDED to use long press on key as the designated interaction to launch the assist app as described in section 7.2.3. MUST launch the user-selected assist app, in other words the app that implements or an activity handling the intent.

    If Handheld device implementations support and group them into a separate section from alerting and silent non-conversation notifications, they:

    • [3.8.4/H-1-1]* MUST display conversation notifications ahead of non conversation notifications with the exception of Watch My Domains Pro 2.0 crack serial keygen foreground service notifications and importance:high notifications.

    If Android Handheld device implementations support a lock screen, they:

    • [3.8.10/H-1-1] MUST display the Lock screen Notifications including the Media Notification Template.

    If Handheld device implementations support a secure lock screen, they:

    • [3.9/H-1-1] MUST implement the full range of device administration policies defined in the Android SDK documentation.
    • [3.9/H-1-2] MUST declare the support of managed profiles via the feature flag, except when the device is configured so that it would report itself as a low RAM device or so that it allocates internal (non-removable) storage as shared storage.

    If Handheld device implementations include support for and APIs and allow third-party applications to publishthen they:

    • [3.8.16/H-1-1] MUST declare the feature flag and set it to .
    • [3.8.16/H-1-2] MUST provide a user affordance with the ability to add, edit, select, and operate the user’s favorite device controls from the controls registered by the third-party applications through the and the APIs.
    • [3.8.16/H-1-3] MUST provide access to this user affordance within three interactions from a default Launcher.
    • [3.8.16/H-1-4] MUST accurately render in this user affordance the name and icon of each third-party app that Watch My Domains Pro 2.0 crack serial keygen controls via the API as well as any specified fields provided by the APIs.

    Conversely, If Handheld device implementations do not implement such controls, Watch My Domains Pro 2.0 crack serial keygen, they:

    Handheld device implementations:

    • [3.10/H-0-1] MUST support third-party accessibility services.
    • [3.10/H-SR] Are STRONGLY RECOMMENDED to preload accessibility services on the device comparable with or exceeding functionality of Watch My Domains Pro 2.0 crack serial keygen Switch Access and TalkBack (for languages supported by the preinstalled Text-to-speech engine) accessibility services as provided in the talkback open source project.
    • [3.11/H-0-1] MUST support installation of third-party TTS engines.
    • [3.11/H-SR] Are STRONGLY RECOMMENDED to include a TTS engine supporting the languages available on the device.
    • [3.13/H-SR] Are STRONGLY RECOMMENDED to include a Quick Settings UI component.

    If Android handheld device implementations declare or support, Watch My Domains Pro 2.0 crack serial keygen, they:

    • [3.16/H-1-1] MUST support the companion device pairing feature.

    If the navigation function is provided as an on-screen, gesture-based action:

    • [7.2.3/H] The gesture recognition zone for the Home function SHOULD be no higher than 32 dp in height from the bottom of the screen.

    If Handheld device implementations provide a navigation function as a gesture from anywhere on the left and right edges of the screen:

    • [7.2.3/H-0-1] The navigation function's gesture area MUST be less than 40 dp in width on each side. The gesture area SHOULD be 24 dp in width by default.

    If Handheld device implementations support a secure lock screen and have greater Quick Pallet Maker Crack v6.1.0 & Activator Download [2021] or equal to 2GB of memory available to the kernel and userspace, they:

    • [3.9/H-1-2] MUST declare the support of managed profiles via the feature flag.

    2.2.4. Performance and Power

    • [8.1/H-0-1] Consistent frame latency. Inconsistent frame latency or a delay to render frames MUST NOT happen more often than 5 frames in a second, and SHOULD be below 1 frames in a second.
    • [8.1/H-0-2] User interface latency. Device implementations MUST ensure low latency user experience by scrolling a list of 10K list entries as defined by the Android Compatibility Test Suite (CTS) in less than 36 secs.
    • [8.1/H-0-3] Task switching. When multiple applications have been launched, re-launching an already-running application after it has been launched MUST take less than 1 second.

    Handheld device implementations:

    • [8.2/H-0-1] MUST ensure a sequential write performance of at least 5 MB/s.
    • [8.2/H-0-2] MUST ensure a random write performance of at least 0.5 MB/s.
    • [8.2/H-0-3] MUST ensure a sequential read performance of at least 15 MB/s.
    • [8.2/H-0-4] MUST ensure a random read performance of at least 3.5 MB/s.

    If Handheld device implementations include features to improve device power management that are included in AOSP or extend the features that are included in AOSP, they:

    • [8.3/H-1-1] MUST provide user affordance to enable and disable the battery saver feature.
    • [8.3/H-1-2] MUST provide user affordance to display all apps that are exempted from App Standby and Doze power-saving modes.

    Handheld device implementations:

    • [8.4/H-0-1] MUST provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
    • [8.4/H-0-2] MUST report all power consumption values in milliampere hours (mAh).
    • [8.4/H-0-3] MUST report CPU power consumption per each process's UID. The Android Open Source Project meets the requirement through the kernel module implementation.
    • [8.4/H-0-4] MUST make this power usage available via the shell command to the app developer.
    • [8.4/H] SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.

    If Handheld device implementations include a screen Watch My Domains Pro 2.0 crack serial keygen video output, they:

    2.2.5. Security Model

    Handheld device implementations:

    • [9.1/H-0-1] MUST allow third-party apps to access the usage statistics via the permission and provide a user-accessible mechanism to grant or revoke access to such apps in response to the intent.

    Handheld device implementations:

    • [9.11/H-0-2] MUST back up the keystore implementation with an isolated execution environment.
    • [9.11/H-0-3] MUST have implementations of RSA, AES, ECDSA, and HMAC cryptographic algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms Email Protection an area that is securely isolated from the code running on the kernel and above. Secure isolation MUST block all potential mechanisms by which kernel or userspace code might access the internal state of the isolated environment, including DMA. The upstream Android Open Source Project (AOSP) meets this requirement by using the Trusty implementation, but another ARM TrustZone-based solution or a third-party reviewed secure implementation of a proper hypervisor-based isolation are alternative options.
    • [9.11/H-0-4] MUST perform the Watch My Domains Pro 2.0 crack serial keygen screen authentication in the isolated execution environment and only when successful, allow the authentication-bound keys to be used. Lock screen credentials MUST be stored in a way that allows only the isolated execution environment to perform lock screen authentication. The upstream Android Open Source Project provides the Gatekeeper Hardware Abstraction Layer (HAL) and Trusty, which can be used to satisfy this requirement.
    • [9.11/H-0-5] MUST support key attestation where the attestation signing key is protected by secure hardware and signing is performed in secure hardware. The attestation signing keys MUST be shared across large enough number of devices to prevent the keys from being used as device identifiers. One way of meeting this requirement is to share the same attestation key unless at least 100,000 units of a given SKU are produced. If more than 100,000 units of an SKU are produced, a different key MAY be used for each 100,000 units.
    • [9/H-0-1] MUST declare the ‘android.hardware.security.model.compatible’ feature.

    Note that if a device implementation is already launched on an earlier Android version, such a device is exempted from the requirement to have a keystore backed by an isolated execution environment and support the key attestation, unless it declares the feature which requires a keystore backed by an isolated execution environment.

    When Handheld device implementations support a secure lock screen, they:

    • [9.11/H-1-1] MUST allow the user to choose the shortest sleep timeout, that is a transition time from the unlocked to the locked state, as 15 seconds or less.
    • [9.11/H-1-2] MUST provide user affordance to hide notifications and disable all forms of authentication except for the primary authentication described in 9.11.1 Secure Lock Screen. The AOSP meets the requirement as lockdown mode.

    If Handheld device implementations include multiple users and do not declare the feature flag, they:

    • [9.5/H-2-1] MUST support restricted profiles, a feature that allows device owners to manage additional users and their capabilities on the device. With restricted profiles, device owners can quickly set up separate environments for additional users to work in, with the ability to manage finer-grained restrictions in the apps that are available in those environments.

    If Handheld device implementations include multiple users and declare the feature flag, they:

    • [9.5/H-3-1] MUST NOT support restricted profiles but MUST align with the AOSP implementation of controls to enable /disable other users from accessing the voice calls and SMS.

    Android, through the System API VoiceInteractionService supports a mechanism for secure always-on hotword detection without mic access indication

    If Handheld device implementations support the System API or a another mechanism for hotword detection without mic access indication, they:

    • [9.8/H-1-1] MUST make sure the hotword detection service can only transmit data to the System or ContentCaptureService
    • [9.8/H-1-2] MUST make sure the hotword detection service can only transmit mic audio data or data derived from it to the system server through API, or to through API.
    • [9.8/H-1-3] MUST NOT supply mic audio that is longer than 30 seconds for an individual hardware-triggered request to the hotword detection service.
    • [9.8/H-1-4] MUST NOT supply buffered mic audio older than 8 seconds for an individual request to the hotword detection service.
    • [9.8/H-1-5] MUST NOT supply buffered mic audio older than 30 seconds to the voice interaction service or similar entity.
    • [9.8/H-1-6] MUST NOT allow more than 100 bytes of data to be transmitted out of the hotword detection service on each successful hotword result.
    • [9.8/H-1-7] MUST NOT allow more than 5 bits of data to be transmitted out of the hotword detection service on each negative hotword result.
    • [9.8/H-1-8] MUST only allow transmission of data out of the hotword detection service on a hotword validation request from the system server.
    • [9.8/H-1-9] MUST NOT allow a user-installable application to provide the hotword detection service.
    • [9.8/H-1-10] MUST NOT surface in the UI quantitative data about mic usage by the hotword detection service.
    • [9.8/H-1-11] MUST log the number of bytes included in every transmission from the hotword detection service to allow inspectability for security researchers.
    • [9.8/H-1-12] MUST support a debug mode that logs raw contents of every transmission from the hotword detection service to allow inspectability for security researchers.
    • [9.8/H-1-13] MUST restart the process hosting the hotword detection Watch My Domains Pro 2.0 crack serial keygen at least once every hour or every 30 hardware-trigger events, whichever comes first.
    • [9.8/H-1-14] MUST display the microphone indicator, as required in [9.8/C-3-1], when a successful hotword result is transmitted to the voice interaction service or similar entity.
    • [9.8/H-SR] Are STRONGLY RECOMMENDED to notify users before setting an application as the provider of the hotword detection service.
    • [9.8/H-SR] Are STRONGLY RECOMMENDED to disallow the transmission of unstructured data out of the hotword detection service.

    If device implementations include an application that uses the System APIor similar mechanism for hotword detection without mic usage indication, the application:

    • [9.8/H-2-1] MUST provide explicit notice to the user for each hotword phrase supported.
    • [9.8/H-2-2] MUST NOT preserve raw audio data, or data derived from it, through the hotword detection service.
    • [9.8/H-2-3] MUST NOT transmit from the hotword detection service, audio data, data that can be used to reconstruct (wholly or partially) the audio, or audio contents unrelated to the hotword itself, except to the .

    If Handheld device implementations declarethey:

    • [9.8.2/H-4-1] MUST display the microphone indicator when an app is accessing audio data from the microphone, but not when the microphone is only accessed by, or apps holding the roles called out in section 9.1 with CDD identifier [C-4-X]. .
    • [9.8.2/H-4-2] MUST display the list of Recent and Active apps using microphone as returned fromalong ElcomSoft iOS Forensic Toolkit 6.20 Torrent Archives any attribution messages associated with them.
    • [9.8.2/H-4-3] MUST not hide the microphone indicator for system apps that have visible user interfaces or direct user interaction.
    • [9.8.2/H-4-4] MUST display the list of Recent and Active apps using the microphone as returned fromalong with any attribution messages associated with them.

    If Handheld device implementations declarethey:

    • [9.8.2/H-5-1] MUST display the camera indicator when an app is accessing live camera data, but not when the camera is only being accessed by app(s) holding the roles called out in section 9.1 with CDD identifier [C-4-X].
    • [9.8.2/H-5-2] MUST display Recent and Active apps using camera as returned fromalong with any attribution messages associated with them.
    • [9.8.2/H-5-3] MUST not hide the camera indicator for system apps that have visible user interfaces or direct user interaction.

    2.2.6. Developer Tools and Options Compatibility

    Handheld device implementations (* Not applicable for Tablet):

    • [6.1/H-0-1]* MUST support the shell command .

    Handheld device implementations (* Not applicable for Tablet):

    • Perfetto
      • [6.1/H-0-2]* MUST expose a binary to the shell user which cmdline complies with the perfetto documentation.
      • [6.1/H-0-3]* The perfetto binary Watch My Domains Pro 2.0 crack serial keygen accept as input a protobuf config that complies with the schema defined in the perfetto documentation.
      • [6.1/H-0-4]* Watch My Domains Pro 2.0 crack serial keygen perfetto binary MUST write as output a protobuf trace that complies with the schema defined in the perfetto documentation.
      • [6.1/H-0-5]* MUST provide, through the perfetto binary, at least the data sources described in the perfetto documentation.
      • [6.1/H-0-6]* The perfetto traced daemon MUST be enabled by default (system property ).

    2.2.7. Handheld Media Performance Class

    See Section 7.11 for the definition of media performance class.

    2.2.7.1. Media

    If Handheld device implementations return forthen they:

    • [5.1/H-1-1] MUST advertise the maximum number of hardware video decoder sessions that can be run concurrently in any codec combination via the and methods.
    • [5.1/H-1-2] MUST support 6 instances of hardware video decoder sessions (AVC or HEVC) in any codec combination running concurrently at 720p [email protected] fps.
    • [5.1/H-1-3] MUST advertise the maximum number of hardware Watch My Domains Pro 2.0 crack serial keygen encoder sessions that can be run concurrently in any codec combination via the and methods.
    • [5.1/H-1-4] MUST support 6 instances of hardware video encoder sessions (AVC or HEVC) in any codec combination running concurrently at 720p [email protected] fps.
    • [5.1/H-1-5] MUST advertise the maximum number of hardware video encoder and decoder sessions that can be run concurrently in any codec combination via the and methods.
    • [5.1/H-1-6] MUST support 6 instances of hardware video decoder and hardware video encoder sessions (AVC or HEVC) in any codec combination running concurrently at [email protected] fps resolution.
    • [5.1/H-1-7] MUST have a codec initialization latency of 65 ms or less for a 1080p or smaller video encoding session for all hardware video encoders when under load. Load here is defined as a concurrent 1080p to 720p video-only transcoding session using hardware video codecs together with the 1080p audio-video recording initialization.
    • [5.1/H-1-8] MUST have a codec initialization latency of 50 ms or less for a 128 kbps or lower bitrate audio encoding session for all audio encoders when under load.Load here is defined as a concurrent 1080p to 720p video-only transcoding session using hardware video codecs together with the 1080p audio-video recording initialization.
    • [5.3/H-1-1] MUST NOT drop more than 1 frame in 10 seconds (i.e Watch My Domains Pro 2.0 crack serial keygen than 0.333 percent frame drop) for a 1080p 30 fps video session under load, Watch My Domains Pro 2.0 crack serial keygen. Load is defined as a concurrent 1080p to 720p video-only transcoding session using hardware video codecs, as well as a 128 kbps AAC audio playback.
    • [5.3/H-1-2] MUST NOT drop more than 1 frame in 10 seconds during a video resolution change in a 30 fps video session under load. Load is defined as a concurrent 1080p to 720p video-only transcoding session using hardware video codecs, as well as a 128Kbps AAC audio playback.
    • [5.6/H-1-1] MUST have a tap-to-tone latency of less than 100 milliseconds using the OboeTester tap-to-tone test or CTS Verifier tap-to-tone test.

    If Handheld device implementations Watch My Domains Pro 2.0 crack serial keygen forthen they:

    • [5.1/H-1-1] MUST advertise the maximum number of hardware video decoder sessions that can be run concurrently in any codec combination via the and methods.
    • [5.1/H-1-2] MUST support 6 instances of hardware video decoder sessions (AVC, HEVC, VP9* or later) in any codec combination running concurrently at 720p [email protected] fps. *Only 2 instances are required if VP9 codec is present.
    • [5.1/H-1-3] MUST advertise the maximum number of hardware video encoder sessions that can be run concurrently in any codec combination via the and methods.
    • [5.1/H-1-4] MUST support 6 instances of hardware video encoder sessions (AVC, HEVC, VP9* or later) in any codec combination running concurrently at 720p [email protected] *Only 2 instances are required if VP9 codec is present.
    • [5.1/H-1-5] MUST advertise the maximum number of hardware video encoder and decoder sessions that can be run concurrently in any codec combination via the and methods.
    • [5.1/H-1-6] MUST support 6 instances of hardware video decoder and hardware video encoder sessions (AVC, HEVC, VP9* or later) in any codec combination running concurrently at [email protected] resolution, Watch My Domains Pro 2.0 crack serial keygen. *Only 2 instances are required if VP9 codec is present.
    • [5.1/H-1-7] MUST have a codec initialization latency of 50 ms or less for a 1080p or smaller video encoding session for all hardware video encoders when under load. Load here is defined as a concurrent 1080p to 720p video-only transcoding session using hardware video codecs together with the 1080p audio-video recording initialization.
    • [5.1/H-1-8] MUST have a codec initialization latency of 40 ms or less for a 128 kbps or lower bitrate audio encoding session for all audio encoders when under load. Load here is defined as a concurrent 1080p to 720p video-only transcoding session using hardware video codecs together with the 1080p audio-video recording initialization.
    • [5.3/H-1-1] MUST NOT drop more than 2 frames in 10 seconds (i.e less than 0.333 percent frame drop) for a 1080p 60 fps video session under load. Load is defined Watch My Domains Pro 2.0 crack serial keygen a concurrent 1080p to 720p video-only transcoding session using hardware video codecs, as well as a 128 kbps AAC audio playback.
    • [5.3/H-1-2] MUST NOT drop more than 2 frames in 10 seconds during a video resolution change in a 60 fps video session under load. Load is defined as a concurrent 1080p to 720p video-only transcoding session using hardware video codecs, as well as a 128 kbps AAC audio playback.
    • [5.6/H-1-1] MUST have a tap-to-tone latency of less than 100 milliseconds using the OboeTester tap-to-tone test or CTS Verifier tap-to-tone test.

    2.2.7.2. Camera

    If Handheld device implementations return forthen they:

    • [7.5/H-1-1] MUST have a primary rear facing camera with a resolution of at least 12 megapixels supporting video capture at [email protected], Watch My Domains Pro 2.0 crack serial keygen. The primary rear-facing camera is the rear-facing camera with the lowest camera ID.
    • [7.5/H-1-2] MUST have a primary front facing camera with a resolution of at least 4 megapixels supporting video capture at [email protected] The primary front-facing camera is the front-facing camera with the lowest camera ID.
    • [7.5/H-1-3] MUST support android.info.supportedHardwareLevel property as FULL or better for back primary and LIMITED or better for front primary camera.
    • [7.5/H-1-4] MUST support CameraMetadata.SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME for both primary cameras.
    • [7.5/H-1-5] MUST have camera2 JPEG capture latency < Watch My Domains Pro 2.0 crack serial keygen for 1080p resolution as measured by the CTS camera PerformanceTest under ITS lighting conditions (3000K) for both primary cameras.
    • [7.5/H-1-6] MUST have camera2 startup latency (open camera to first preview frame) < 600ms as measured by the CTS camera PerformanceTest under ITS lighting conditions (3000K) for both primary cameras.

    If Handheld device implementations return forthen they:

    • [7.5/H-1-1] MUST have a primary rear facing camera with a resolution of at least 12 megapixels supporting video capture at [email protected] The primary rear-facing camera is the rear-facing camera with the lowest camera ID.
    • [7.5/H-1-2] MUST have a primary front facing camera with a resolution of at least 5 megapixels and support video capture at [email protected] The primary front-facing camera is the front-facing camera with the lowest camera ID.
    • [7.5/H-1-3] MUST support property as or better for both primary cameras.
    • [7.5/H-1-4] MUST support for both primary cameras.
    • [7.5/H-1-5] MUST Watch My Domains Pro 2.0 crack serial keygen camera2 JPEG capture latency < 1000 ms for 1080p resolution as measured by the CTS camera PerformanceTest under ITS lighting conditions (3000K) for both primary cameras.
    • [7.5/H-1-6] MUST have camera2 startup latency (open camera to first preview frame) < 500 ms as measured by the CTS camera PerformanceTest under ITS lighting conditions (3000K) for both primary cameras.
    • [7.5/H-1-7] For apps targeting API level 31 or higher, the camera device MUST NOT support JPEG capture resolutions smaller than 1080p for both primary cameras.
    • [7.5/H-1-8] MUST support and for the primary back camera.

    2.2.7.3. Hardware

    If Handheld device implementations return forthen they:

    • [7.1.1.1/H-1-1] MUST have screen resolution of at least 1080p.
    • [7.1.1.3/H-1-1] MUST have screen density of at least 400 dpi.
    • [7.6.1/H-1-1] MUST have at least 6 GB of physical memory.

    If Handheld device implementations return forthen they:

    • [7.1.1.1/H-2-1] MUST have screen resolution of at least 1080p.
    • [7.1.1.3/H-2-1] MUST have screen density of at least 400 dpi.
    • [7.6.1/H-2-1] MUST have at least 6 GB of physical memory.

    2.2.7.4. Performance

    If Handheld device implementations return forthen they:

    • [8.2/H-1-1] MUST ensure a sequential write performance of at least 100 MB/s.
    • [8.2/H-1-2] MUST ensure a random write performance of at least 10 MB/s.
    • [8.2/H-1-3] MUST ensure a sequential read performance of at least 200 MB/s.
    • [8.2/H-1-4] MUST ensure a random read performance of at least 25 MB/s.

    If Handheld device implementations return forthen they:

    • [8.2/H-2-1] MUST ensure a sequential write performance of at least 125 MB/s.
    • [8.2/H-2-2] MUST ensure a random write performance of at least 10 MB/s.
    • [8.2/H-2-3] MUST ensure a sequential read performance of at least 250 MB/s.
    • [8.2/H-2-4] MUST ensure a random read performance of at least 40 MB/s.

    2.3. Television Requirements

    An Android Television device refers to an Android device implementation that is an entertainment interface for consuming digital media, movies, games, apps, and/or live TV for users sitting about ten feet away (a “lean back” or “10-foot user interface”).

    Android device implementations are classified as a Television if they meet all the following criteria:

    • Have provided a mechanism to remotely control the rendered user interface on the display that might sit ten feet away from the user.
    • Have an embedded screen display with the diagonal length larger than 24 inches OR include a video output port, such as VGA, HDMI, DisplayPort, Watch My Domains Pro 2.0 crack serial keygen, or a wireless port for display.

    The additional requirements in the rest of this section are specific to Android Television device implementations.

    2.3.1. Hardware

    Television device implementations:

    • [7.2.2/T-0-1] MUST support D-pad.
    • [7.2.3/T-0-1] MUST provide the Home and Back functions.
    • [7.2.3/T-0-2] MUST send both the normal and long press event of the Back function () to the foreground application.
    • [7.2.6.1/T-0-1] MUST include support for game controllers and declare the feature flag.
    • [7.2.7/T] SHOULD provide a remote control from which users can access non-touch navigation and core navigation keys inputs.

    If Television device implementations include a 3-axis gyroscope, they:

    • [7.3.4/T-1-1] MUST be able to report events up to a frequency of at least 100 Hz.
    • [7.3.4/T-1-2] MUST be capable of measuring orientation changes up to 1000 degrees per second.

    Television device implementations:

    • [7.4.3/T-0-1] MUST support Bluetooth and Bluetooth LE.
    • [7.6.1/T-0-1] MUST have at least 4 GB of non-volatile storage available for application private data (a.k.a. "/data" partition).

    If Television device implementations include a USB port that supports host mode, they:

    • [7.5.3/T-1-1] MUST include support for an external camera that connects through this USB port but is not necessarily always connected.

    If TV device implementations are 32-bit:

    • [7.6.1/T-1-1] The memory available to the kernel and userspace MUST be at least 896MB if any of the following densities are used:

      • 400dpi or higher on small/normal screens
      • xhdpi or higher on large screens
      • tvdpi or higher on extra large screens

    If TV device implementations are 64-bit:

    • [7.6.1/T-2-1] The memory available to the kernel and userspace MUST be at least 1280MB if any of the following densities are used:

      • 400dpi or higher on small/normal screens
      • xhdpi or higher on large screens
      • tvdpi or higher on extra large screens

    Note that the "memory available to the kernel and userspace" above refers to the memory space provided in addition to any memory already dedicated to hardware components such as radio, video, and so on that are not under the kernel’s control on device implementations.

    Television device implementations:

    • [7.8.1/T] SHOULD include a microphone.
    • [7.8.2/T-0-1] MUST have an audio output and declare .

    2.3.2. Multimedia

    Television device implementations MUST support the following audio encoding and decoding formats and make them available to third-party applications:

    • [5.1/T-0-1] MPEG-4 Watch My Domains Pro 2.0 crack serial keygen Profile (AAC LC)
    • [5.1/T-0-2] MPEG-4 HE AAC Profile (AAC+)
    • [5.1/T-0-3] AAC ELD (enhanced low delay AAC)

    Television device implementations MUST support the following video encoding formats and make them available to third-party applications:

    • [5.2/T-0-1] H.264
    • [5.2/T-0-2] VP8

    Television device implementations:

    • [5.2.2/T-SR] Are STRONGLY RECOMMENDED to support H.264 encoding of 720p and 1080p resolution videos at 30 frames per second.

    Television device implementations MUST support the following video decoding formats and make them available to third-party applications:

    Television device implementations MUST support MPEG-2 decoding, as detailed in Section 5.3.1, at standard video frame rates and resolutions up to and including:

    • [5.3.1/T-1-1] HD 1080p at 59.94 frames per second with Main Profile High Level.
    • [5.3.1/T-1-2] HD 1080i at 59.94 frames per second with Main Profile High Level. They MUST deinterlace interlaced MPEG-2 video and make it Desktop-Tools Archives - Patch Cracks to third-party applications.

    Television device implementations MUST support H.264 decoding, as detailed in Section 5.3.4, at standard video frame rates and resolutions up to and including:

    • [5.3.4/T-1-1] HD 1080p at 60 frames per second with Baseline Profile
    • [5.3.4/T-1-2] HD 1080p at 60 frames per second with Main Profile
    • [5.3.4/T-1-3] HD 1080p at 60 frames per second with High Profile Level 4.2

    Television device implementations with H.265 hardware decoders MUST support H.265 decoding, as detailed in Section 5.3.5, at standard video frame rates and resolutions up to and including:

    • [5.3.5/T-1-1] HD 1080p at 60 frames per second with Main Profile Level 4.1

    If Television device implementations with H.265 hardware decoders support H.265 decoding and the UHD decoding profile, they:

    • [5.3.5/T-2-1] MUST support the UHD decoding profile at 60 frames per second with Main10 Level 5 Main Tier profile

    Television device implementations MUST support VP8 decoding, Watch My Domains Pro 2.0 crack serial keygen, as detailed in Section 5.3.6, at standard video frame rates and resolutions up to and including:

    • [5.3.6/T-1-1] HD 1080p at 60 frames per second decoding profile

    Television device implementations with VP9 hardware decoders MUST support VP9 decoding, as detailed in Section 5.3.7, at standard video frame rates and resolutions up to and including:

    • [5.3.7/T-1-1] HD 1080p at 60 frames per second with profile 0 (8 bit color depth)

    If Television device implementations with VP9 hardware decoders support VP9 decoding and the UHD decoding profile, they:

    • [5.3.7/T-2-1] MUST support the UHD decoding profile at 60 frames per second with profile 0 (8 bit color depth).
    • [5.3.7/T-2-1] Are STRONGLY RECOMMENDED to support the UHD decoding profile at 60 frames per second with profile 2 (10 bit color depth).

    Television device implementations:

    • [5.5/T-0-1] MUST include support for system Master Volume and digital audio output volume attenuation on supported outputs, except for compressed audio passthrough output (where no audio decoding is done on the device).

    If Television device implementations do not have a built in display, but instead support an external display connected via HDMI, they:

    • [5.8/T-0-1] MUST set the HDMI output mode to select the maximum resolution that can be supported with either a 50Hz or 60Hz refresh rate.
    • [5.8/T-SR] Are STRONGLY RECOMMENDED to provide a user configurable HDMI refresh rate selector.
    • [5.8] SHOULD set the HDMI output mode refresh rate to either 50Hz or 60Hz, depending on the video refresh rate for the region the device is sold in.

    If Television device implementations do not have a built in display, but instead support an external display connected via HDMI, they:

    • [5.8/T-1-1] MUST support HDCP 2.2.

    If Television device implementations do not support UHD decoding, Watch My Domains Pro 2.0 crack serial keygen, but instead support an external display connected via HDMI, they:

    • [5.8/T-2-1] MUST support HDCP 1.4

    2.3.3. Software

    Television device implementations:

    • [3/T-0-1] MUST declare the features and .
    • [3.2.3.1/T-0-1] MUST preload one or more applications or service components with an intent handler, for all the public intent filter patterns defined by the following application intents listed here.
    • [3.4.1/T-0-1] MUST provide a complete implementation of the Watch My Domains Pro 2.0 crack serial keygen API.

    If Android Television device implementations support a Ableton Live 10 Crack Activation Code Archives - CrackPur screen,they:

    • [3.8.10/T-1-1] MUST display the Lock screen Notifications including the Media Notification Watch My Domains Pro 2.0 crack serial keygen device implementations:

      • [3.8.14/T-SR] Are STRONGLY RECOMMENDED to support picture-in-picture (PIP) mode multi-window.
      • [3.10/T-0-1] MUST support third-party accessibility services.
      • [3.10/T-SR] Are STRONGLY RECOMMENDED to preload accessibility services on the device comparable with or exceeding functionality of the Switch Access and TalkBack (for languages supported by the preinstalled Text-to-speech engine) accessibility services as provided in the talkback open source project.

      If Television device implementations report the featurethey:

      • [3.11/T-SR] Are STRONGLY RECOMMENDED to include a TTS engine supporting the languages available on the device.
      • [3.11/T-1-1] MUST support installation of third-party TTS engines.

      Television device implementations:

      • [3.12/T-0-1] MUST support TV Input Framework.

      2.3.4. Performance and Power

      • [8.1/T-0-1] Consistent frame latency. Inconsistent frame latency or a delay to render frames MUST NOT happen more often than 5 frames in a second, and SHOULD be below 1 frames in a second.
      • [8.2/T-0-1] MUST ensure a sequential write performance of at least 5MB/s.
      • [8.2/T-0-2] MUST ensure a random write performance of at least 0.5MB/s.
      • [8.2/T-0-3] MUST ensure a sequential read performance of at least 15MB/s.
      • [8.2/T-0-4] MUST ensure a random read performance of at least 3.5MB/s.

      If Television device implementations include features to improve device power management that are included in AOSP or extend the features that are included in AOSP, Watch My Domains Pro 2.0 crack serial keygen, they:

      • [8.3/T-1-1] MUST provide user affordance to enable and disable the battery saver feature.

      If Television device implementations do not have a battery they:

      If Television device implementations have a battery they:

      • [8.3/T-1-3] MUST provide user affordance to display all apps that are exempted from App Standby and Doze power-saving modes.

      Television device implementations:

      • [8.4/T-0-1] MUST provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
      • [8.4/T-0-2] MUST report all power consumption values in milliampere hours (mAh).
      • [8.4/T-0-3] MUST report CPU power consumption per each process's UID. The Android Open Source Project meets the requirement through the kernel module implementation.
      • [8.4/T] SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.
      • [8.4/T-0-4] MUST make this power usage available via the shell command to the app developer.

      2.3.5. Security Model

      Television device implementations:

      • [9.11/T-0-1] MUST back up the keystore implementation with an isolated execution environment.
      • [9.11/T-0-2] MUST have implementations of RSA, AES, ECDSA and HMAC Watch My Domains Pro 2.0 crack serial keygen algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms in an area that is securely isolated from the code running on the kernel and above. Secure isolation MUST block all potential mechanisms by which kernel or userspace code might access the internal state of the isolated environment, including DMA. The upstream Android Open Source Project (AOSP) meets this requirement by using the Trusty implementation, but another ARM TrustZone-based solution or a third-party reviewed secure implementation of a proper hypervisor-based isolation are alternative options.
      • [9.11/T-0-3] MUST perform the lock screen authentication in the isolated execution environment and only when successful, allow the authentication-bound keys to be used. Lock screen credentials MUST be stored in a way that allows only the isolated execution environment to perform lock screen authentication. The upstream Android Open Source Project provides the Gatekeeper Hardware Abstraction Layer (HAL) and Trusty, which can be used to satisfy this requirement.
      • [9.11/T-0-4] MUST support key attestation where the attestation signing key is protected by secure hardware and signing is performed in secure hardware. The attestation signing keys MUST be shared across large enough number of devices to prevent the keys from being used as device identifiers. One way of meeting this requirement is to share the same attestation key unless at least 100,000 units of a given SKU are produced. If more than 100,000 units of an SKU are produced, a different key MAY be used for each 100,000 units.
      • [9/T-0-1] MUST declare the ‘android.hardware.security.model.compatible’ feature.

      Note that if a device implementation is already launched on an earlier Android version, such a device is exempted from the requirement to have a keystore backed by an isolated execution environment and support the key attestation, unless it declares the feature which requires a keystore backed by an isolated execution environment.

      If Television device implementations support a secure lock screen, they:

      • [9.11/T-1-1] MUST allow the user to choose the Sleep timeout for transition from the unlocked to the locked state, with a minimum allowable timeout up to 15 seconds or less.

      If Television device implementations include multiple Watch My Domains Pro 2.0 crack serial keygen and do not declare the feature flag, they:

      • [9.5/T-2-1] MUST support restricted profiles, a feature that allows device owners to manage additional users and their capabilities on the device. With restricted profiles, device owners can quickly set up separate environments for additional users to work in, with the ability to manage finer-grained restrictions in the apps that are available in those environments.

      If Television device implementations include multiple users and declare the feature flag, they:

      • [9.5/T-3-1] MUST NOT support restricted profiles but MUST align with the AOSP implementation of controls to enable /disable other users from accessing the voice calls and SMS.

      If Television device implementations declarethey:

      • [[9.8.2/T-4-1] MUST display the microphone indicator when an app is accessing audio data from the microphone, but not when the microphone is only accessed by HotwordDetectionService, SOURCE_HOTWORD, ContentCaptureService, or apps holding the roles called out in Section 9.1 Permissions with CDD identifier C-3-X].
      • [[9.8.2/T-4-2] MUST not hide the microphone indicator for system apps that have visible user interfaces or direct user interaction.

      If Television device implementations declarethey:

      • [[9.8.2/T-5-1] MUST display the camera indicator when an app is accessing live camera data, but not when the camera is only being accessed by app(s) holding the roles called out in Section 9.1 Permissions with CDD identifier [C-3-X].
      • [[9.8.2/T-5-2] MUST not hide the camera indicator for system apps that have visible user interfaces or direct user interaction.

      2.3.6. Developer Tools and Options Compatibility

      Television device implementations:

      2.4. Watch Requirements

      An Android Watch device refers to an Android device implementation intended to be worn on the body, perhaps on the wrist.

      Android device implementations are classified as a Watch if they meet all the following criteria:

      • Have a screen with the physical diagonal length in the range from 1.1 to 2.5 inches.
      • Have a mechanism provided to be worn on the body.

      The additional requirements in the rest of this section are specific to Android Watch device implementations.

      2.4.1. Hardware

      Watch device implementations:

      • [7.1.1.1/W-0-1] MUST have a screen with the physical diagonal size in the range from 1.1 to 2.5 inches.

      • [7.2.3/W-0-1] MUST have the Home function available to the user, and the Back function except for when it is in .

      • [7.2.4/W-0-1] MUST support touchscreen input.

      • [7.3.1/W-SR] Are STRONGLY RECOMMENDED to include a 3-axis accelerometer.

      If Watch device implementations include a GPS/GNSS receiver and report the capability to applications through the feature flag, they:

      • [7.3.3/W-1-1] MUST report GNSS measurements, as soon as they are found, even if a location calculated from GPS/GNSS is not yet reported.
      • [7.3.3/W-1-2] MUST report GNSS pseudoranges and pseudorange rates, that, in open-sky conditions after determining the location, while stationary or moving with less than 0.2 meter per second squared of acceleration, are sufficient to calculate position within 20 meters, and speed within 0.2 meters per second, at least 95% of the time.

      If Watch device implementations include a 3-axis gyroscope, they:

      • [7.3.4/W-2-1] MUST be capable of measuring orientation changes up to 1000 Watch My Domains Pro 2.0 crack serial keygen per second.

      Watch device implementations:

      • [7.4.3/W-0-1] MUST support Bluetooth.

      • [7.6.1/W-0-1] MUST have at least 1 GB of non-volatile storage available for application private data (a.k.a. "/data" partition).

      • [7.6.1/W-0-2] MUST have at least 416 MB memory available to the kernel and userspace.

      • [7.8.1/W-0-1] MUST include a microphone.

      • [7.8.2/W] MAY have audio output.

      2.4.2. Multimedia

      No additional requirements.

      2.4.3. Software

      Watch device implementations:

      • [3/W-0-1] MUST declare the feature .
      • [3/W-0-2] MUST support uiMode = UI_MODE_TYPE_WATCH.
      • [3.2.3.1/W-0-1] MUST preload one or more applications or service components with an intent handler, for all the public intent filter patterns defined by the following application intents listed here.

      Watch device implementations:

      • [3.8.4/W-SR] Are STRONGLY RECOMMENDED to implement an assistant on the device to handle the Assist action.

      Watch device implementations that declare the feature flag:

      • [3.10/W-1-1] MUST support third-party accessibility services.
      • [3.10/W-SR] Are STRONGLY RECOMMENDED to preload accessibility services on the device comparable with or exceeding functionality of the Switch Access and TalkBack (for languages supported by the preinstalled Text-to-speech engine) accessibility services as provided in the talkback open source project.

      If Watch device implementations report the feature android.hardware.audio.output, they:

      • [3.11/W-SR] Are STRONGLY RECOMMENDED to include a TTS engine supporting the languages available on the device.

      • [3.11/W-0-1] MUST support installation of third-party TTS engines.

      2.4.4. Performance and Power

      If Watch device implementations include features to improve device power management that are included in AOSP or extend the features that are included in AOSP, they:

      • [8.3/W-SR] Are STRONGLY RECOMMENDED to provide user affordance to display all apps that are exempted from App Standby and Doze power-saving modes.
      • [8.3/W-SR] Are STRONGLY RECOMMENDED to provide user affordance to enable and disable the battery saver feature.

      Watch device implementations:

      • [8.4/W-0-1] MUST provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
      • [8.4/W-0-2] MUST report all power consumption values in milliampere hours (mAh).
      • [8.4/W-0-3] MUST report CPU power consumption per each process's UID, Watch My Domains Pro 2.0 crack serial keygen. The Android Open Source Project meets the requirement through the kernel module implementation.
      • [8.4/W-0-4] MUST make this power usage available via the shell command to the app developer.
      • [8.4/W] SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.

      2.4.5. Security Model

      Watch device implementations:

      • [9/H-0-1] MUST declare the ‘android.hardware.security.model.compatible’ feature.

      If Watch device implementations include multiple users and do not declare the feature flag, they:

      • [9.5/W-1-1] MUST support restricted profiles, a feature that allows device owners to manage additional users and their capabilities on the device. With restricted profiles, device owners can quickly set up separate environments for additional users to work in, with the ability to manage finer-grained restrictions in the apps that are available in those environments.

      If Watch device implementations include multiple users and declare the feature flag, they:

      • [9.5/W-2-1] MUST NOT support restricted profiles but MUST align with the AOSP implementation of controls to enable /disable other users from accessing the voice calls and SMS.

      2.5. Automotive Requirements

      Android Automotive implementation refers to a vehicle head unit running Android as an operating system for part or all of the system and/or infotainment functionality.

      Android device implementations are classified as an Automotive if they declare the feature or meet all the following criteria.

      • Are embedded as part of, or pluggable to, an automotive vehicle.
      • Are using a screen in the driver's seat row as the primary display.

      The additional requirements in the rest of this section are specific to Android Automotive device implementations.

      2.5.1. Hardware

      Automotive device implementations:

      • [7.1.1.1/A-0-1] MUST have a screen at least 6 inches in physical diagonal size.
      • [7.1.1.1/A-0-2] MUST have a screen size layout of at least 750 dp x 480 dp.

      • [7.2.3/A-0-1] MUST provide the Home function and MAY provide Back and Recent functions.

      • [7.2.3/A-0-2] MUST send both the normal Watch My Domains Pro 2.0 crack serial keygen long press event of the Back function () to the foreground application.

      • [7.3/A-0-1] MUST implement and report, and .

      • [7.3/A-0-2] The value of the flag MUST be consistent with dashboard day/night mode and SHOULD be based on ambient light sensor input. The underlying ambient light sensor MAY be the same as Photometer.

      • [7.3/A-0-3] MUST provide sensor additional info field as part of SensorAdditionalInfo for every sensor provided.

      • [7.3/A-0-1] MAY dead reckon Location by fusing GPS/GNSS with additional sensors. If Location is dead reckoned, it is STRONGLY RECOMMENDED to implement and report the corresponding Sensor types and/or Vehicle Property IDs used.

      • [7.3/A-0-2] The Location requested via LocationManager#requestLocationUpdates() MUST NOT be map matched.

      If Automotive device implementations support OpenGL ES 3.1, they:

      • [7.1.4.1/A-0-1] MUST declare OpenGL ES 3.1 or higher.
      • [7.1.4.1/A-0-2] MUST support Vulkan 1.1.
      • [7.1.4.1/A-0-3] MUST include Vulkan loader and export all symbols.

      If Automotive device implementations include a 3-axis accelerometer, they:

      If Automotive device implementations include a 3-axis gyroscope, they:

      • [7.3.4/A-2-1] MUST be able to report events up to a frequency of at least 100 Hz.
      • [7.3.4/A-2-3] MUST be capable of measuring orientation changes up to 250 degrees per second.
      • [7.3.4/A-SR] Are STRONGLY RECOMMENDED to configure the gyroscope’s measurement range to +/-250dps in order to maximize the resolution possible

      If Automotive device implementations include a GPS/GNSS receiver, but do not include cellular network-based data connectivity, they:

      • [7.3.3/A-3-1] MUST determine location the very first time the GPS/GNSS receiver is Watch My Domains Pro 2.0 crack serial keygen on or after 4+ days within 60 seconds.
      • [7.3.3/A-3-2] MUST meet the time-to-first-fix criteria as described in 7.3.3/C-1-2 and 7.3.3/C-1-6 for all other location requests (i.e requests which are not the first time ever or after 4+ days). The requirement 7.3.3/C-1-2 is typically met in vehicles without cellular network-based data connectivity, by using GNSS orbit predictions calculated on the receiver, or using the last known vehicle location along with the ability to dead reckon for at least 60 seconds with a position accuracy satisfying 7.3.3/C-1-3, or a combination of both.

      Automotive device implementations:

      • [7.4.3/A-0-1] MUST support Bluetooth and SHOULD support Bluetooth LE.
      • [7.4.3/A-0-2] Android Automotive implementations MUST support the following Bluetooth profiles:
        • Phone calling over Hands-Free Profile (HFP).
        • Media playback over Audio Distribution Profile (A2DP).
        • Media playback control over Remote Control Profile (AVRCP).
        • Contact sharing using the Phone Book Access Profile (PBAP).
      • [7.4.3/A-SR] Are STRONGLY RECOMMENDED to support Message Access Profile (MAP).

      • [7.4.5/A] SHOULD include support for cellular network-based data connectivity.

      • [7.4.5/A] MAY use the System API constant for networks that should be available to system apps.

      An exterior view camera is a camera that images scenes outside of the device implementation, like a dashcam.

      Automotive device implementations:

      • SHOULD include one or more exterior view cameras.

      If Automotive device implementations include an exterior view camera, for such a camera, they:

      • [7.5/A-1-1] MUST NOT have exterior view cameras accessible via the Android Camera APIs, unless they comply with camera core requirements.
      • [7.5/A-SR] Are STRONGLY RECOMMENDED not to rotate or horizontally mirror the camera preview.
      • [7.5.5/A-SR] Are STRONGLY RECOMMENDED to be oriented so that the long dimension of the camera aligns with the horizon.
      • [7.5/A-SR] Are STRONGLY RECOMMENDED to have a resolution of at least 1.3 megapixels.
      • SHOULD have either fixed-focus or EDOF (extended depth of field) hardware.
      • SHOULD support Android Synchronization Framework.
      • MAY have either hardware auto-focus or software auto-focus implemented in the camera driver.

      Automotive device implementations:

      • [7.6.1/A-0-1] MUST have at least 4 GB of non-volatile storage available for application private data (a.k.a. "/data" partition).

      • [7.6.1/A] SHOULD format the data partition to offer improved performance and longevity on flash storage, for example using file-system.

      If Automotive device implementations provide shared external storage via a portion of the internal non-removable storage, they:

      • [7.6.1/A-SR] Are STRONGLY RECOMMENDED to reduce I/O overhead on operations performed on the external storage, for example by using .

      If Automotive device implementations are 32-bit:

      • [7.6.1/A-1-1] The memory available to the kernel and userspace MUST be at least 512MB if any of the following densities are used:

        • 280dpi or lower on small/normal screens
        • ldpi or lower on extra large screens
        • mdpi or lower on large screens
      • [7.6.1/A-1-2] The memory available to the kernel and userspace MUST be at least 608MB if any of the following densities are used:

        • xhdpi or higher on small/normal screens
        • hdpi or higher on large screens
        • mdpi or higher on extra large screens
      • [7.6.1/A-1-3] The memory available to the kernel and userspace MUST be at least 896MB if any of the following densities are used:

        • 400dpi or higher on small/normal screens
        • xhdpi or higher on large screens
        • tvdpi or higher on extra large screens
      • [7.6.1/A-1-4] The memory available to the kernel and userspace MUST be at least 1344MB if any of the following densities are used:

        • 560dpi or higher on small/normal screens
        • 400dpi or higher on large screens
        • xhdpi or higher on extra large screens

      If Automotive device implementations Watch My Domains Pro 2.0 crack serial keygen 64-bit:

      • [7.6.1/A-2-1] The memory available to the kernel and userspace MUST be at least 816MB if any of the following densities are used:

        • 280dpi or lower on small/normal screens
        • ldpi or lower on extra large screens
        • mdpi or lower on large screens
      • [7.6.1/A-2-2] The memory available to the kernel and userspace MUST be at least 944MB if any of the following densities are used:

        • xhdpi or higher on small/normal screens
        • hdpi or higher on large screens
        • mdpi or higher on extra large screens
      • [7.6.1/A-2-3] The memory available to the kernel and userspace MUST be at least 1280MB if any of the following densities are used:

        • 400dpi or higher on small/normal screens
        • xhdpi or higher on large screens
        • tvdpi or higher on extra large screens
      • [7.6.1/A-2-4] The memory available to the kernel and userspace MUST be at least 1824MB if any of the following densities are used:

        • 560dpi or higher on small/normal screens
        • 400dpi or higher on large screens
        • xhdpi or higher on extra large screens

      Note that the "memory available to the kernel How To Automatically Login In Windows 10 (Few Simple Methods) userspace" above refers to the memory space provided in addition to any memory already dedicated to hardware components such as radio, video, Watch My Domains Pro 2.0 crack serial keygen, and so on that are not under the kernel’s control on device implementations.

      Automotive device implementations:

      • [7.7.1/A] SHOULD include a USB port supporting peripheral mode.

      Automotive device implementations:

      • [7.8.1/A-0-1] MUST include a microphone.

      Automotive device implementations:

      • [7.8.2/A-0-1] MUST have an audio output and declare .

      2.5.2. Multimedia

      Automotive device implementations MUST support the following audio encoding and decoding formats and make them available to third-party applications:

      • [5.1/A-0-1] MPEG-4 AAC Profile (AAC LC)
      • [5.1/A-0-2] MPEG-4 HE AAC Profile (AAC+)
      • [5.1/A-0-3] AAC ELD (enhanced low delay AAC)

      Automotive device implementations MUST support the following video encoding formats and make them available to third-party applications:

      • [5.2/A-0-1] H.264 AVC
      • [5.2/A-0-2] VP8

      Automotive device implementations MUST support the following video decoding formats and make them available to third-party applications:

      • [5.3/A-0-1] H.264 AVC
      • [5.3/A-0-2] MPEG-4 Watch My Domains Pro 2.0 crack serial keygen VP8
      • [5.3/A-0-4] VP9

      Automotive device implementations are STRONGLY RECOMMENDED to support the following video decoding:

      2.5.3. Software

      Automotive device implementations:

      • [3/A-0-1] MUST declare the feature .

      • [3/A-0-2] MUST support uiMode = .

      • [3/A-0-3] MUST support all public APIs in the namespace.

      If Automotive device implementations provide a proprietary API using withthey:

      • [3/A-1-1] MUST NOT attach special privileges to system application's use of these properties, or prevent third-party applications from using these properties.
      • [3/A-1-2] MUST NOT replicate a vehicle property that already exists in the SDK.

      Automotive device implementations:

      • [3.2.1/A-0-1] MUST support and enforce all permissions constants as documented by the Automotive Permission reference page.

      • [3.2.3.1/A-0-1] MUST preload one or more applications or service components with an intent handler, for all the public intent filter patterns defined by the following application intents listed here.

      • [3.4.1/A-0-1] MUST provide a complete implementation of the API.

      • [3.8.3/A-0-1] MUST display notifications that use the API when requested by third-party applications.

      • [3.8.4/A-SR] Are Strongly Recommended to implement an assistant on the device to handle the Assist action.

      If Automotive Watch My Domains Pro 2.0 crack serial keygen implementations include a push-to-talk button, they:

      • [3.8.4/A-1-1] MUST use a short press of the push-to-talk button as the designated interaction to launch the user-selected assist app, in other words the app that implements .

      Automotive device implementations:

      • [3.8.3.1/A-0-1] MUST correctly render resources as described in the SDK documentation.
      • [3.8.3.1/A-0-2] MUST display PLAY and MUTE for notification actions in the place of those provided through
      • [3.8.3.1/A] SHOULD restrict the use of rich management tasks such as per-notification-channel controls. MAY use UI affordance per application to reduce controls.

      If Automotive device implementations support User HAL properties, they:

      Automotive device implementations:

      If Automotive device implementations include a default launcher app, they:

      Automotive device implementations:

      • [3.8/A] MAY restrict the application requests to enter a full screen mode as described in .
      • [3.8/A] MAY keep the status bar and the navigation bar visible at all times.
      • [3.8/A] MAY restrict the application requests to change the colors behind the system UI elements, to ensure those elements are clearly visible at all times.

      2.5.4. Performance and Power

      Automotive device implementations:

      • [8.2/A-0-1] MUST report the number of bytes read and written to non-volatile storage per each process's UID so the stats are available to developers through System API. The Android Open Source Project meets the requirement through the kernel module.
      • [8.3/A-1-3] MUST support Garage Mode.
      • [8.3/A] SHOULD be in Garage Mode for at least 15 minutes after every drive unless:
        • The battery is drained.
        • No idle jobs are scheduled.
        • The driver exits Garage Mode.
      • [8.4/A-0-1] MUST provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
      • [8.4/A-0-2] MUST report all power consumption values in milliampere hours (mAh).
      • [8.4/A-0-3] MUST report CPU power consumption per each process's UID. The Android Open Source Project meets the requirement through the kernel module implementation.
      • [8.4/A] SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.
      • [8.4/A-0-4] MUST make this power usage available via the shell command to the app developer.

      2.5.5. Security Model

      If Automotive device implementations support multiple users, they:

      Automotive device implementations:

      • [9.11/A-0-1] MUST back up the keystore implementation with an isolated execution environment.
      • [9.11/A-0-2] MUST have implementations of RSA, AES, ECDSA and HMAC cryptographic algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms in an area that is securely isolated from the code running on the kernel and above. Secure isolation MUST block all potential mechanisms by which kernel or userspace code might access the internal state of the isolated environment, including DMA. The upstream Android Open Source Project (AOSP) meets this requirement by using the Trusty implementation, but another ARM TrustZone-based solution or a third-party reviewed secure implementation of a proper hypervisor-based isolation are alternative options.
      • [9.11/A-0-3] MUST perform the lock screen authentication in the isolated execution environment and only when successful, allow the authentication-bound keys to be used. Lock screen credentials MUST be stored in a way that allows only the isolated execution environment to perform lock screen authentication. The upstream Android Open Source Project provides the Gatekeeper Hardware Abstraction Layer (HAL) and Trusty, Watch My Domains Pro 2.0 crack serial keygen, which can be used to satisfy this requirement.
      • [9.11/A-0-4] MUST support key attestation where the attestation signing key is protected by secure hardware and signing is performed in secure hardware. The attestation signing keys MUST be shared across large enough number of devices to prevent the keys from being used as device identifiers. One way of meeting this requirement is to share the same attestation key unless at least 100,000 units of a given SKU are produced. If more than 100,000 units of an SKU are produced, a different key MAY be used for each 100,000 units.
      • [9/A-0-1] MUST declare the ‘android.hardware.security.model.compatible’ feature.

      Note that if a device implementation is already launched on an earlier Android version, such a device is exempted from the requirement to have a keystore Watch My Domains Pro 2.0 crack serial keygen by an isolated execution environment and support the key attestation, unless it declares the feature which requires a keystore backed by an isolated execution environment.

      Automotive device implementations:

      • [9.14/A-0-1] MUST gatekeep messages from Android framework vehicle subsystems, e.g., whitelisting permitted message types and message sources.
      • [9.14/A-0-2] MUST watchdog against denial of service attacks from the Android framework or third-party apps. This guards against malicious software flooding the vehicle network with traffic, which may lead to malfunctioning vehicle subsystems.

      2.5.6. Developer Tools and Options Compatibility

      Automotive device implementations:

      2.6. Tablet Requirements

      An Android Tablet device refers to an Android device implementation that typically meets all the following criteria:

      • Used by holding in both hands.
      • Does not have a clamshell or convertible configuration.
      • Physical keyboard implementations used with the device connect by means of a standard connection (e.g. USB, Bluetooth).
      • Has a power source that provides mobility, such as a battery.

      Tablet device implementations have similar requirements to handheld device implementations. The exceptions are indicated by an * in that section and noted for reference in this section.

      2.6.1. Hardware

      Screen Size

      • [7.1.1.1/Tab-0-1] MUST have a screen in the range of 7 to 18 inches.

      ** Gyroscope**

    Источник: [https://torrent-igruha.org/3551-portal.html]

    Missing the gTLD deadline may cost firms

    Applications for generic top-level domains (gTLDs) are open for three months from this week, Watch My Domains Pro 2.0 crack serial keygen, but organisations that miss out or wait to see what their competitors do risk being left behind, according to Melbourne IT CEO Theo Hnarakis.

    The Internet Corporation for Assigned Names and Numbers (ICANN) approved the proposal for gTLDs in June last year, which will see the release of new, generic, brand and Watch My Domains Pro 2.0 crack serial keygen domain-name extensions, such as '.melbourne' and '.sydney'.

    Organisations are already getting into the act, with global groups such as Unicef and Canon already confirming that they intend to apply for their own branded domain-name extension. However, unlike domain names across existing top-level domains such as .com or .org, where anyone can register available names at their own leisure, the first round of gTLDs applications will only be accepted for three months, Watch My Domains Pro 2.0 crack serial keygen, between 12 January and 12 April.

    According Hnarakis, organisations that miss the opportunity may find themselves in an unfavourable position.

    "When it closes, it'll close and potentially won't reopen again for several years. If you miss out this window, potentially your competitors will have a two- three- or four-year head start," he said.

    "My advice to companies is that if at all in your future planning you see the internet as a critical part of your strategy, then this needs to be seriously considered."

    Melbourne IT said that it has already received over 100 applications and 300 expressions of interest, adding that the industry is expecting 1500 gTLD applications globally. Of its applications, 20 of those are from Australian organisations that it says are mainly ASX100 companies. It expects that number to double in the next couple of months, providing Melbourne IT with an additional revenue stream.

    Organisations thinking about purchasing a gTLD, but that are sitting out the first round to wait and see what their competitors do, may be playing to their rivals' tactics.

    "A lot of companies are keeping [their applications] very, very guarded, because they don't want to enter into a competitive position. Everyone's got us on [non-disclosure agreements]. They do not want to be alerting their competitors that they're doing something in this area."

    While Hnarakis was unable to state who was specifically interested in purchasing their own gTLD, he was able to shed some light on the industries that are jumping on-board.

    "Certainly, financial services is showing enormous amounts of interest. Companies that are the early adopters to the internet to begin with are the verticals that are obviously showing interest, Watch My Domains Pro 2.0 crack serial keygen, but we are seeing some of the later adopters come in, Watch My Domains Pro 2.0 crack serial keygen, too. Media companies, financial services companies, airlines are showing interest [and], naturally, some big-brand technology companies, as well."

    The application process isn't within the reach of most individuals, with the initial application costing US$185,000 and the registering entity required to further pay an annual fee of US$25,000, but, when the value of gTLDs were taken into account, Hnarakis said the price wasn't that expensive, using Watch My Domains Pro 2.0 crack serial keygen current return on investment in the dotcom space as an example.

    "Realestate.com sold recently for [allegedly] $8 million. Other generic names can sell for several million dollars as well. Applying for holidays in the dotcom space would be worth several million dollars. To actually own '.holidays' would be highly advantageous to someone."

    The fees also aren't arbitrarily set either. According to Hnarakis, they are necessary to support the application process' screening and possible legal processes.

    "It is not just looking at a three-page document. It is a 50-question, 300-page legal document that will need examination from ICANN. Governments have the opportunity to review these applications, and so do individuals and competitors. ICANN is building into the application cost the potential for contention for . legal challenges against some of these [applications]. The cost is significant because of the amount of checks and balances that have been built in to ensure that an application that gets through . has been thoroughly reviewed."

    Although this Education News Archives - My Personal News for Recruitment and Counselling - MPNRC.Org should guard against cybersquatting, US advertising groups, such as the US Association of National Advertisers (ANA), are not convinced that enough protection is in place.

    Hnarakis, Watch My Domains Pro 2.0 crack serial keygen, who is currently working with some of ANA's members, said he could relate to its concerns.

    "I've certainly got empathy for their concerns. There's some issues around defensive registrations that ICANN could be doing more in. If it's a brand that is well known, that is protected within the intellectual property framework, then that trademark or those intellectual property owners should be given certain advantages, and not be forced to defensively register their names."

    However, Hnarakis did not support all of ANA's views.

    "I don't share their views that this won't create new opportunities. This will create new business models, Watch My Domains Pro 2.0 crack serial keygen. This will enhance innovation on the internet, and provide more choice. Certainly, ICANN could be doing more to protect and limit the cost exposure of brand owners, but, from a point of view of innovation — early adopters jumping on this and ReMouse Micro crack serial keygen advantage of it — that's what free enterprise is all about, Watch My Domains Pro 2.0 crack serial keygen, isn't it?"

    Watch My Domains Pro 2.0 crack serial keygen IT Priorities

    0 comments

    Leave a Reply

    Your email address will not be published. Required fields are marked *